Produce as fast as 5 business days
30-90A
SHORE HARDNESS
0.8-5MPA
TENSILE STRENGTH
1-5%
COMPRESSIVE SET
45-220%
ELONGATION AT BREAK
80°C
HDT@0.45 MPA
FLEXIBLE & COMPRESSIBLE
Our TPU Rubber Like, also known as Flexible Material, is produced by SLA Industrial 3D Printing process. Produce rubber and flexible material with almost nonvisible 3D Print layer lines. Options are available to vary shore hardness from 30A (softest) to 90A (hardest). This is a flexible material that can be used as seals, gasket, replacement of silicone and rubber parts.
RUBBER LIKE QUALITY
Right out of production, this material is matte in texture. It is common to have small support marks on supported areas during production in this material. Even so, this material should give very realistic rubber like appearance. White and Black colour options are available as default. Other colour options can be provided upon request.
EXAMPLE APPLICATIONS (NOT LIMITED TO)
RUBBER
SEALS
FUNCTIONAL PARTS
LEAD TIME
- Standard Lead Time: Ship in about 5-8 business days
SPECIFICATION
- Build Size: 380L x 280W x 380H (mm)
- Minimum Wall Thickness: 1mm (may vary)
- Minimum Detail: 0.5 mm
- Estimated Accuracy: +/-0.3mm typically (0.3% of longest side)
- Colour: Black or White
- Shore Hardness: 30A to 90A
BENEFITS
- Smooth
- Flexible
- Durable
- Compressible
- Options for Soft or Hard
- Close to injection molded appearance
DESIGN FOR SLA TPU RUBBER LIKE
Minimum Wall Thickness
We recommend the following minimum wall thickness:
- 1.5 mm (For Parts smaller than 10cm)
- 2 mm (For Parts between 10cm-20cm)
- 3 mm (For Parts larger than 20cm)
Parts with Sufficient wall thickness is crucial to ensure successful print.
Embossed and Engraved Details
For Embossed Details: Recommended minimum thickness of 0.5mm and height of 0.5mm
For Engraved Details: Recommended minimum thickness of 0.5mm and depth of 0.5mm
Clearance for Fitting
It is very important to allow clearance between the space of 2 objects, so as to give a freedom of movement between the gap. We recommend:
- 0.1 mm (tight fit), 0.2 mm (standard fit) and 0.3 mm (loose fit).
You are advised to test out several iterations to attain a perfect fit.
Hollowing Model
Hollowing of parts is not recommended in this material as it is not possible to produce parts with internal cavity.
Reduce Warpage
Warpage issues isn’t applicable for this material since it is flexible in nature.
Avoid Multiple Parts in a single file
Uploading multiple parts within a file may cause unnecessary delay in your order due to processing issues. Simply upload each part file separately for a smooth transaction.